LINSEIS Messgeräte GmbH, with an outstanding reputation as a manufacturer of thermo-physical and micro-mechanical measurement equipment, is ready to meet your physical property evaluation needs.

No matter what your material testing requirements are, our experience and capabilities are ready to meet your requests. Test services can offer an economical alternative to equipment purchase. Test results are reported in tabular and graphical formats, with all test data files saved and provided to the customer at the completion of testing. Test turnaround times are usually less than 1 week with summary test results sent via email within hours of test completiont.

 

Testing Instructions:

It is necessary to have detailed information for a good and safe measurement. Please complete the following forms and send it to us with your sample.

1. Testing instructions (PDF Download)

2. Sample sheet (PDF Download)

 

Linseis Messgeräte GmbH
Vielitzerstr. 43
D-95100 Selb / Germany

Tel.: +49 (0) 9287/880 0
Fax: +49 (0) 9287/704 88

eMail: info@linseis.de

The following measurements can be offered as service in our application lab:


DIL – Dilatometry

  • Determination of coefficient of thermal expansion and thermal expansion between -150°C and 1750°C
  • Measurement from 275,- €
  • According to ASTM D 696, E 228, E 831, E 1363, E 1545, E 1824, DIN 53752

 

DSC – Dynamic scanning calorimetry

  • Measurement of enthalpy, phase transitions and specific heat capacity (Cp), Measurement from -150°C to 1550°C
  • Measurement from 250,- €
  • According to ASTM C 351, D 3417, D 3895, D 4565, E 793, E 794, DIN 51004, 51007, 53765, 65467, DIN EN 728, ISO 10837, 11357, 11409

 

TGA – Thermogravimetry

  • Measurement of mass change/ decomposition residues between RT and 1550°C
  • Measurement from 300,- €
  • According to ASTM E 914, E 1131, E 1868, DIN 51006, ISO 7111, 11358

 

STA – simultaneous thermal analysis

  • Simultaneous measurement of TG and DSC for determination of mass change and calorimetric effects between RT and 1550°C
  • Measurement from 350,- €
  • According to ASTM E 914, E 1131, E 1868, DIN 51006, ISO 7111, 11358

 

LFA - Laser Flash Analysis

  • Measurement of thermal diffusivity, thermal conductivity and sepcific heat capacity between RT and 1500°C
  • Measurement from 550,- €
  • According to ASTM E 1461, DIN 30905, DIN EN 821

 

THB - Transient Hot Bridge Measurement

  • Measurement of thermal conductivity between RT and 150°C
  • Measurement from 250,- €
  • According to ---

 

HFM – Heat flow meter

  • Measurement of thermal conductivity and thermal resistance (u-value) of insulators and insulation materials between 5°C and 80°C
  • Measurement from 300,- €
  • According to ASTM C518, JIS A 1412, ISO 8301, DIN 12667

 

LSR - Seebeck-, resistance- and ZT measurement

  • Measurement of seebeck-coefficient, electric conductivity / electric resistance and figure of merit (ZT) between RT and 1100°C
  • Measurement from 350,- €
  • According to JIS R 1650-1

 

RITA – inductive dilatometry

  • Measurement of phase diagrams and phase transitions of steel samples, CCT, CTT, TTT;
  • Measurement of coefficient of thermal expansion (CTE) with fast heating and cooling rates between RT and 1600°C
  • Measurement from 450,- €
  • According toASTM A1033-04

 

TF-LFA – thin film laser flash

  • Measurement of thermal diffusivity and thermal conductivity of thin films and coatings between RT and 500°C
  • Measurement from 1700.- €
  • According to ---