X

Standards for thermal analysis (ISO, ASTM and DIN)

Standards for Differential Scanning Calorimeters

Standard Title
ISO 11357 Plastics – Differential scanning calorimetry (DSC) – Part 1: General principles (ISO 11357-1:2016); German version EN ISO 11357-1:2016
DIN EN 728 Plastics piping and ducting systems – Polyolefin pipes and fittings – Determination of oxidation induction time
ISO 11409 Plastics – Phenolic resins – Determination of heats and temperatures of reaction by differential scanning calorimetry (ISO 11409:1993); German version EN ISO 11409:1998
ISO 10837 Determination of the thermal stability of polyethylene (PE) for use in gas pipes and fittings
DIN 65467 Aerospace – Testing of thermosetting resin systems with and without reinforcement – DSC method
ASTM E 794 Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis
ASTM D 4565 Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
ASTM C 351 Standard Test Method for Mean Specific Heat of Thermal Insulation
ASTM E967 Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E968 Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
ASTM E793 Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM D3895 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
ASTM D3417 Standard Test Method for Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry (DSC) (Withdrawn 2004)
ASTM D3418 Standard Test Method for Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry (DSC) (Withdrawn 2004)
ASTM E1269 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
DIN 51004 Thermal analysis; determination of melting temperatures of crystalline materials by differential thermal analysis
DIN 51007 Thermal analysis – Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) – General Principles
DIN 53765 Testing of plastics and elastomeres; thermal analysis; DSC-method

Standards for Thermogravimetric Analyzers

Standard Title
ISO 11358 Plastics – Thermogravimetry (TG) of polymers – Part 1: General principles (ISO 11358-1:2014); German version EN ISO 11358-1:2014
ISO 7111 Plastics — Thermogravimetry of polymers — Temperature scanning method
DIN 51006 Thermal analysis (TA) – Thermogravimetry (TG) – Principles
ASTM E 914 Practice for Evaluating Temperature Scale for Thermogravity (Withdrawn 1994)
ASTM E 1868 Standard Test Methods for Loss-On-Drying by Thermogravimetry
ISO/DIS 9924 Rubber and rubber products – Determination of the composition of vulcanizates and uncured compounds by thermogravimetry – Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
ASTM E1131 Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM D3850 Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
ASTM D6375 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM D6370 Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA)
ASTM E2550 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM D3175 Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke

Standards for Thermomechanical Analyzers

Standard Title
DIN 51005 Thermal analysis (TA) – Terms
ISO 11359-2 Plastics – Thermomechanical analysis (TMA) – Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
IPC-TM-650 2.4.24 Glass Transition Temperature and Z-Axis ThermalExpansion by TMA
IPC-TM-650 2.4.41 Coefficient of Linear Thermal Expansion ofElectrical Insulating Materials
IPC-TM-650 2.4.24.1 Time to Delamination (TMA Method)
IPC-TM-650 2.4.41.3 In-Plane Coefficient of Thermal Expansion, OrganicFilms
IPC-TM-650 2.4.24.3 Glass Transition Temperature of Organic Films−TMA Method
ENV 1159-3 Advanced technical ceramics – Ceramic composite materials, thermophysical properties – Part 3: Determination of specific heat capacity
DIN 53752 Testing of plastics; determination of the coefficient of linear thermal expansion
DIN 52545 Testing of rubber – Determination of low-temperature behaviour of elastomers – Principles and test methods
CEI/IEC 1006 Methods of test for the determination of the glass transition temperature of electrical insulating materials
ASTM E 2347 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
ASTM E 1824 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method
ASTM E 2113 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM E 2092 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E 1545 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
ASTM D 3386 Standard Test Method for Coefficient of Linear Thermal Expansion of Electrical Insulating Materials
ASTM E831 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM D696 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer
ISO 11359 – Parts 1 to 3 Plastics — Thermomechanical analysis (TMA) — Part 3: Determination of penetration temperature
DIN 51045 Determination of the thermal expansion of solids

Standards for Dilatometers

Standard Title
ASTM E831 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM D696 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer
ASTM C372 Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method
DIN 51045 Determination of the thermal expansion of solids – Part 1: Basic rules

Standards for Thermal Conductivity

Standard Title
ASTM E1461 Standard Test Method for Thermal Diffusivity by the Flash Method
ASTM D 5470 Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials
DIN 30905 Thermosphysical properties of hard metals – Measurement of thermal diffusivity with the laserflash (heat pulse) method
JIS A 1412 Test Method For Thermal Resistance And Related Properties Of Thermal Insulations – Heat Flow Meter Apparatus
DIN EN 821 Advanced technical ceramics – Monolithic ceramics, thermo-physical properties – Part 2: Determination of thermal diffusity by the laser flash (or heat pulse) method
BS EN 1159-2 Advanced technical ceramics. Ceramic composites. Thermophysical properties. Determination of thermal diffusivity
ASTM C714 Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method
ASTM C518 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ISO 8301 Thermal insulation; determination of steady-state thermal resistance and related properties; heat flow meter apparatus
DIN EN 12667 EN 12 Thermal performance of building materials and products – Determination of thermal resistance by means of guarded hot plate and heat flow meter methods – Products of high and medium thermal resistance

Standards for Electrical Properties

Standard Title
ASTM F76-08 Standard Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors