X

Applications d’analyse thermique

Les appareils de mesure de LINSEIS testent les propriétés thermiques d’une grande variété de matériaux dans une grande variété d’industries. Les applications collectées ont été mesurées et évaluées dans notre laboratoire ou par nos clients. Les rapports d’application sont actuellement disponibles en anglais, en partie aussi en allemand. Nous vérifions régulièrement les liens externes. Si l’un des liens ne fonctionne pas, la mesure de l’application sur le site Web externe a été supprimée.

Les applications suivantes sont divisées en groupes d’appareils. Veuillez cliquer sur le bouton correspondant pour aller directement à l’aperçu.

Analyse Thermique: DSC, TGA, STA, DIL

ApplicationInstrumentPublié
Thermal analysis of butter and margarineChip-DSC 10evaluation (PDF), measured curve (PNG)
Thermal analysis of chocolateChip-DSC 10evaluation (PDF), measured curve (PNG)
Thermal analysis of CholesterolChip-DSC 100evaluation (PDF), measured curve (PNG)
Thermal analysis with color changeChip-DSC 1evaluation (PDF)
PHOTO-DSC AS A VERSATILE TOOL FOR UV CURING SYSTEMS CHARACTERIZATIONChip-DSC with UV optionDownload Paper
Gamma-ray interaction with copper-doped bismuth–borate glassesDIL L74 OpticalPhysica B: Condensed Matter, Vol. 391
Effects of milling time on the development of porosity in Cu by the
reduction of CuO
DIL L74 OpticalDownload Paper
Thermal Properties of Alkali Activated Slag Plaster for Wooden StructuresDIL L75 HorizontalScientific Reports, Vol 10
Dilatometric model for determining the formation of austenite during continuous heating in medium carbon steelDIL L75 VertikalJournal of Thermal Analysis and Calorimetry, Vol 137
Thermal expansion evolution of metastable β Ti-15Mo alloy during linear heatingDIL L75 VertikalIOP Conf. Series: Materials Science and Engineering, Vol. 461
Low Thermal Expansion of Ba0.5Sr0.5Co0.7Fe0.2Mn0.1O3- cathode MaterialDIL L76International Journal of ELECTROCHEMICAL SCIENCE
Dilatometric Study of the Formation of Martensite and of the Effects of Stabilization of Austenite in High-Chromium Pipe SteelDIL L76 and DIL L78 RITA QDTPhysics of Metals and Metallography, Vol. 120
Influence on martensite‐start‐temperature and volume expansion of low‐transformation‐temperature materials used for residual stress relief in beam weldingDIL L78 QMaterials Science & Engineering Vol. 48
Sinter hardening material solutions for high performance applicationsDIL L78 QDownload Paper
Combustion Characteristics of Biomass Charcoals Produced at Different Carbonization Conditions. A Kinetic StudySTA HP 1/2Energy Fuels 2016, Vol. 30
Synthesis and characterization of hydrophobic, ultra-fine fibres based on an organic–inorganic nanocomposite containing a polyimide functionalitySTA PT 1000 Polymers and Polymer Composites, Vol. 27
4-Azafluorenone and -Carboline Fluorophores with Green and Violet/Blue EmissionSTA PT 1600Molecules, Vol. 13
New Copper(II) Coordination Compounds Assembled from Multifunctional Pyridine-Carboxylate Blocks: Synthesis, Structures, and Catalytic Activity in Cycloalkane OxidationSTA PT 1000Molecules, Vol. 24
Characterization of an ilmenite ore for pressurized chemical looping combustionSTA HP 2Applied Energy, Vol. 163
Gasification kinetics during entrained flow gasification – Part I; Devolatilisation and char deactivationSTA HP 2FUEL, Vol. 103
Structurally optimized cupric oxide/polyaniline nanocomposites for efficient humidity sensingTGA PT 1000Surfaces and Interfaces, Vol 18
Effect of Synthesis Oil Palm Mesocarp Fibre (PM) Biopolyol Incorporated with PM Waste Filler on Properties of Polyurethane FoamTGA PT 1000J.Mech.Cont.& Math. Sci., Special Issue-1

Conductivité thermique: LFA, THB, HFM

ApplicationInstrumentPublié
Influence of radiation-crosslinking on flame retarded polymer materials—How crosslinking disrupts the barrier effectLFARadiation Physics and Chemistry Vol. 106
Influence of multiwall carbon nanotube (MWCNT) dispersion on ignition of poly(dimethylsiloxane)–MWCNT compositesLFAPolymer for Advanced Technologies Vol. 26
Phase evolution and thermoelectric performance of calcium cobaltite upon high temperature agingLFACeramics International Vol. 41
3D Printing Fabrication of Amorphous Thermoelectric Materials with Ultralow Thermal ConductivityLFA + LSR-3Nano, Micro, Small Vol. 11
A Unified Approach to Determining the Effective Physicomechanical Characteristics of Filled Polymer Composites Based on Variational PrinciplesTHBMechanics of Composite Materials
The experimental exploration of nano-Si3N4/paraffin on thermal behavior of phase change materialsTHBThermochimica Acta Vol. 597

Thermoélectrique: LSR, Hall, LZT, TEG

ApplicationInstrumentPublié
High-temperature stability of thermoelectric Ca3Co4O9 thin filmsLSR-3Applied Physics Letter Vol.106
Vacancy filling effect in thermoelectric NbOLSR-3Journal of Physics: Condensed Matter Vol. 27
3D Printing Fabrication of Amorphous Thermoelectric Materials with Ultralow Thermal ConductivityLFA + LSR-3Nano, Micro, Small Vol. 11

Analyse des couches minces: TFA, TF-LFA

ApplicationInstrumentPublié
Thermal Conductivity of Au and Ti NanofilmsTFAMaterials Today Proceeding Vol. 8
Thermoelectric characterization of Bi87Sb13 thin films with varying thicknessTFA Semiconductor Science and Technology Vol. 33
Thermoelectric characterization of spin coated PEDOT:PSS films with varying thicknessTFAPSS applications and material science Vol. 215
Heat transport across phase interface in silica aerogel/polymethyl methacrylate compositesTF-LFAPolymer Testing Vol. 76
High-quality textured SnSe thin films for self-powered, rapid-response photothermoelectric applicationTFANano Energy Vol 72
Thermoelectric properties improvement in Mg2Sn thin films by structural modificationTFAJournal of Alloys and Compounds Vol 797
Enhanced control of self-doping in halide perovskites for improved thermoelectric performanceTFANature Communications volume 10