L78 / RITA (DIL Dilatometer)
High speed Quenching and Deformation Dilatometer - TTT- CCT- CHT - Diagram
- [Translate to Korea:] Description
- [Translate to Korea:] Specifications
- [Translate to Korea:] Software
- [Translate to Korea:] Applications
- [Translate to Korea:] Accessories
- [Translate to Korea:] Movie
- [Translate to Korea:] Downloads
[Translate to Korea:] The Quenching/Deformation Dilatometer L78 RITA is especially suitable for the determination of TTT, CHT and CCT diagrams. The special induction furnace enables heating and cooling speeds in excess of 2500°C/s. The system complies with ASTM A1033.
This practice is based upon the principle that, during heating and cooling of steels, dimensional changes occur as a result of both thermal expansions associated with temperature change and phase transformation. In this practice, sensitive high-speed quenching dilatometer equipment is used to detect and measure the changes in dimension that occur as functions of both time and temperature during defined thermal cycles. The resulting data are converted to discrete values of strain for specific values of time and temperature during the thermal cycle. Strain as a function of time or temperature, or both, can then be used to determine the beginning and completion of one or more phase transformations.
Main advantaged of the L78 RITA Quenching Dilatometer system:
- The instrument can perform measurements under vacuum, inert, oxidized, reduced atmospheres from 150 (low temperature option) up to 1000°C and room temperature up to 1600°C in one run.
- The unique heating and cooling arrangement enable very fast controlled heat up and cool down speeds of up to 2500°C/s.
- With the optional susceptor non metallic samples can me analyzed.
- This special Quenching dilatometer is especially esigned for the determination of continuous cooling / heat up CHT, CCT and isotherm TTT- diagrams.
All critical parameters such as heat up and cool down speed, gas control and safety features are software controlled. The professional 32-bit software Linseis TA-WIN operates exclusively under the Microsoft© operation system. All routine (creation of CHT/CCT/TTT diagrams) and demanding applications are solved by the unique Software package which comes with the instrument. Certainly export functions in ASCII-format as well as graphic output is possible.During heating, steel phase transformation of the crystallographic transformation from ferrite, pearlite, bainite, martensite or combinations of these constituents to austenite take place. During cooling, the crystallographic transformations from austenite to ferrite, pearlite, bainite, or martensite or a combination thereof occur. The LINSEIS L78 Quenching Dilatometer is especially designed to perform these demanding rapid expansion measurements. The high speed data acquisition and controlling unit, unique gas quenching setup and precise temperature measurement arrangement are only some of the outstanding features of this instrument.
[Translate to Korea:]
|Model:||L78 Rita/Q Quenching||L78 Rita/D Deformation|
|Furnace :||Induction Furnace||Induction Furnace|
|Temperature range:||-150°C up to 1600°C||-150°C up to 1600°C|
|RT - 1000°C||RT - 1000°C|
|RT - 1600°C||RT - 1600°C|
|Sample holder:||Fused silica, Al2O3||Fused silica, Al2O3|
|Sample geometry:||solid/hallow samples||solid samples|
|Diameter:||approx. 4 mm||approx. 5 mm|
|Length:||approx. 10 mm||approx. 10 mm|
|Heating rate:||up to 2500 K/s||up to 400 K/s|
|Cooling rate:||up to 2500 K/s||up to 400 K/s|
|Acquisition rate:||max. 1000 readings/s||max. 1000 readings/s|
|Deformation force:||-||25 kN|
|Deformation rate:||-||0.01 - 125 mm/s|
|Pause between steps:||-||60 ms|
|Atmosphere||inert, oxid., red., vac.||inert, oxid., red., vac.|
|Power requirements:||230VAC, 16A, 50..60Hz||230VAC, 16A, 50..60Hz|
|Option:||Cryogenic cooling (up to -150°C)||Cryogenic cooling (up to -150°C)|
[Translate to Korea:] All LINSEIS thermo analytical instruments are PC controlled. The individual software modules exclusively run under Microsoft® Windows® operating systems. The complete software consists of 3 modules: temperature control, data acquisition and data evaluation. The 32 bit software incorporates all essential features for measurement preparation, execution, and evaluation of a Dilatometer measurement. Thanks to our specialists and application experts, LINSEIS was able to develop comprehensive easy to understand user friendly application software.
- Program capable of text editing
- Data security in case of power failure
- Thermocouple break protection
- Repetition measurements with minimum parameter input
- Evaluation of current measurement
- Curve comparison up to 32 curves
- Storage and export of evaluations
- Export and import of data ASCII
- Data export to MS Excel
- Multi-methods analysis (DSC TG, TMA, DIL, etc.)
- Zoom function
- 1 and 2 derivation
- Programmable gas control
- Statistical evaluation package
- Free scaling
- Display of relative/absolute shrinkage or expansion curves
- Presentation and calculation of technical / physical expansion coefficient
- Semiautomatic evaluation functions
- Several system correction features
- Special Software package for creation of CCT / CHT / TTT diagrams
[Translate to Korea:]
Automotive / Aviation / Aerospace, Research & Development, Academia, Metals / Alloys Industry
During heating, steel phase transformation of the crystallographic transformation from ferrite, pearlite, bainite, martensite or combinations of these constituents to austenite take place.
During cooling, the crystallographic transformations from austenite to ferrite, pearlite, bainite, or martensite or a combination thereof occur.
Typical strain Diagram for transformation measurement under temperature over time.
In the Time-Temperature-Transformation (TTT) diagrams (also known as Isothermal transformation diagrams) the temperature versus time is measured and plotted. It is generated from percentage transformation vs time measurements, and is very useful for understanding the transformations of an alloy steel that is cooled isothermally.
[Translate to Korea:] A large amount of accessories is available, including:
- Different vacuum pumps, including turbomolecular pumps
- Thermocouple welder
- Different sample preparation devices
- Low temperature attachment (-150°C)
- Selection of manual, semi-automatic and automatic (MFC), Gas Boxes for up to 4 gases
- LN2 Cooling
[Translate to Korea:]
Watch the Linseis L78 / Rita Quenching Dilatometer
- L78_RITA_Qeunching_and_Deformation_Dilatometer_07.pdf (3.8 M Bytes)
- L78_Rita_Quenching_Dilatometer_05.pdf (3.0 M Bytes)
- Dilatometer_Special_Software_63.pdf (2.5 M Bytes)