LINSEIS Messgeräte GmbH, con un'eccellente reputazione come produttore di attrezzature di misurazione termo-fisiche e micro-meccaniche, è pronta a venire incontro alle Vostre necessità di valutazione delle proprietà fisiche. Non importa quali siano i requisti per i test del Vostro materiale, la nostra esperienza e le nostre capacità possono venire incontro alle Vostre richieste. Il servizio test può offrire un'alternativa economica all'acquisto dell'attrezzatura. I risultati dei test vengono riportati in formati grafici e tabulati, con tutti i files dei dati dei test salvati e forniti al cliente al completamento del test. Generalmente i tempi dei test sono meno di 1 settimana con i risultati sommari dei test inviati via mail entro poche ore dal completamento del test. 

Istruzioni per fare i test:

E' necessario avere informazioni dettagliate per una buona misurazione. Prego completare questo form, ed inviatecelo insieme al campione. 

1. Testing instructions (PDF Download)

2. Sample sheet (PDF Download)

 

Linseis Messgeräte GmbH

Vielitzerstr. 43
95100 Selb / Germany

Tel.: +49 (0) 9287/880 0
Fax: +49 (0) 9287/704 88

eMail: info@linseis.de

Servizi offerti dal nostro laboratorio di applicazione:

The following measurements can be offered as service in our application lab:


DIL – Dilatometry

  • Determination of coefficient of thermal expansion and thermal expansion between -150°C and 1750°C
  • Measurement from 275,- €
  • According to ASTM D 696, E 228, E 831, E 1363, E 1545, E 1824, DIN 53752

 

DSC – Dynamic scanning calorimetry

  • Measurement of enthalpy, phase transitions and specific heat capacity (Cp), Measurement from -150°C to 1550°C
  • Measurement from 250,- €
  • According to ASTM C 351, D 3417, D 3895, D 4565, E 793, E 794, DIN 51004, 51007, 53765, 65467, DIN EN 728, ISO 10837, 11357, 11409

 

TGA – Thermogravimetry

  • Measurement of mass change/ decomposition residues between RT and 1550°C
  • Measurement from 300,- €
  • According to ASTM E 914, E 1131, E 1868, DIN 51006, ISO 7111, 11358

 

STA – simultaneous thermal analysis

  • Simultaneous measurement of TG and DSC for determination of mass change and calorimetric effects between RT and 1550°C
  • Measurement from 350,- €
  • According to ASTM E 914, E 1131, E 1868, DIN 51006, ISO 7111, 11358

 

LFA - Laser Flash Analysis

  • Measurement of thermal diffusivity, thermal conductivity and sepcific heat capacity between RT and 1500°C
  • Measurement from 550,- €
  • According to ASTM E 1461, DIN 30905, DIN EN 821

 

THB - Transient Hot Bridge Measurement

  • Measurement of thermal conductivity between RT and 150°C
  • Measurement from 250,- €
  • According to ---

 

HFM – Heat flow meter

  • Measurement of thermal conductivity and thermal resistance (u-value) of insulators and insulation materials between 5°C and 80°C
  • Measurement from 300,- €
  • According to ASTM C518, JIS A 1412, ISO 8301, DIN 12667

 

LSR - Seebeck-, resistance- and ZT measurement

  • Measurement of seebeck-coefficient, electric conductivity / electric resistance and figure of merit (ZT) between RT and 1100°C
  • Measurement from 350,- €
  • According to JIS R 1650-1

 

RITA – inductive dilatometry

  • Measurement of phase diagrams and phase transitions of steel samples, CCT, CTT, TTT;
  • Measurement of coefficient of thermal expansion (CTE) with fast heating and cooling rates between RT and 1600°C
  • Measurement from 450,- €
  • According toASTM A1033-04

 

TF-LFA – thin film laser flash

  • Measurement of thermal diffusivity and thermal conductivity of thin films and coatings between RT and 500°C
  • Measurement from 1700.- €
  • According to ---